Thickness: | 12mm-30mm | Color: | Pure Color White Small Big Chips Transparent Chips |
---|---|---|---|
Artificial Stone Type: | Solid Surface | Stone Form: | Big Slab And Cut To Size |
Countertop Edging: | Flat Edge / Eased Edge | Type: | Stone Solid Surface For Laminate Sheet Countertops |
Application: | Kitchenroom | Usage: | Countertops Floor Wall Ceil Tile Kitchentop |
High Light: | Marble Aluminium Honeycomb Composite Panel,Lightweight Aluminium Honeycomb Composite Panel,20mm Lightweight Stone Panels |
Alu Honeycomb marble composite Lightweight Stone Panels For exterior wall system
Advantages
Aluminum honeycomb panel is a lightweight strong sandwich composite laminated panel, the weight of aluminum honeycomb panel is only 3kg to 10kg per square meter for panel thickness of 6mm to 300mm and the regidity is more than 1.5kN.sqm/m , with prefabrication and assembly of fittings according to framing system, you can easy install the honeycomb panels to the buildings, also very popular for envelope and decoration of interior & exterior walls, partitions, facades, ceiling and canopies. Aluminum honeycomb panel or stainless steel honeycomb sandwich panel is the best alternative materials for single aluminum panel or stainless steel panel because of the competitive cost and much lower weight, much better flatness and much higher strength. It's a green and environment-friendly building and decoration material, trending the construction and decoration industry.
Product Info
Feature: | Environmental ,no radiation, no pollution ,no harm to body,low water absorption,high waterproof |
Color: | Red,blue,green,black,grey,yellow,mix color ect. |
Size: | 2440*1220mm,1800*900mm 300*300mm,600*600mm,800*800mm,or Custom size |
Thickness: | 5~20mm |
Backing: | Mesh, Ceramic, Porcelain, Marble, Glass, Artificial Stone, Granite etc |
Surface Finished: | Polished, Honed with resin glue |
Usage: | Countertops, kitchen tops, bathroom vanity top,worktops, laundry,table tops,bench top, island tops, bar tops, backsplashes. Tub surrounds ,all tile, wall cladding, floor tile for Commercial & Hospitality & Multifamily project. |
Quality Control: | Polished degree:90 degree or up.As customs' requirement |
Thickness tolerance:+/-0.5mm | |
All products checked by experienced QC and then pack | |
Packing: | Inner package: protect film, foam and pallet Outer package: carton/wooden case |
Features
• Low weight and competitive cost
• High stiffness and strength
• Easy to fabricate and install
• Recyclable
• PVDF coating or anodized finish aluminum facing skins for good anti-corrosion performance and high resistance.
• Aluminium facing skins are available in a range of thicknesses from 0.5mm to 3.0mm as per design requirements
• Panels can be produced with different aluminum sheet thicknesses on front and back faces and panel thicknesses as per custom design requirements for weight, strength and installation.
• Aluminum faced panels are chemically cleaned: suitable for painting or the application of decorative laminates
• Brushed and anodised aluminum finishes are also available
• Aluminum honeycomb cell size is 4mm to 8mm as request.
• Wide selection of Joiners &Assembly Accessories are available.
Application
Contact Person: mark
Tel: +8613055431394